What is a Mixed Signal Oscilloscope MSO

What is a Mixed Signal Oscilloscope MSO

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Mixed signal oscilloscope, MSO are becoming increasingly popular as the need increases for combining the analogue measurement channels of an oscilloscope with the logic channels of a logic analyzer.

When investigating boards with logic elements such as embedded systems using an MCU or MPU, it is often necessary a way to combine the analogue channels of a traditional scope so that waveforms can be investigated at the same time as seeing the logic levels on other areas of the circuit. By combining all these elements together, investigating these circuits becomes easier.

Using a mixed signal oscilloscope, MSO, it is possible to undertake detailed investigations of these embedded systems far more easily. Whilst it would not be viable to have a 16 channel oscilloscope, it is quite possible to have, say, a two or 4 channel scope combined with a 16 channel logic analyzer function.

Why mixed signal oscilloscopes

The key advantage of an MSO, mixed signal oscilloscope is that it allows multiple time-aligned digital and analogue waveforms to be displayed on a single display. This can be key to enabling the operation of an embedded circuit to operation to be understood and investigated.

One of the key advantages of an MSO is that it can be used in almost the same way as a normal oscilloscope - the operation is relatively straightforward and easy. Most engineers and embedded system designers have a basic knowledge of how to use an oscilloscope. This can be compared to a full logic analyzer where the operation is different. Time may be needed to learn or relearn how to use a logic analyzer. As a result many design and test engineers often avoid using logic analyzers.

Another reason for the reluctance of many engineers to use logic analyzers is the time needed to set up and make measurements using logic analyzers.

Also the advanced techniques and capabilities available on a full logic analyzer may be way beyond what is needed for embedded systems with MCUs or even for investigating boards that use digital signal processing technology. Logic analyzers also typically provide many more logic channels - these may be needed in some applications, but often they may not be required.

As a result of these issues mixed signal oscilloscopes, MSOs, are often the preferred option. Their ease of use and the level of functionality they provide is more suited to these applications.

Waveform update is one of the important characteristics of an oscilloscope since it directly impacts the instrument’s usability. With sluggish response limiting the usability, users may find it frustrating to operate an unresponsive and slow oscilloscope. This applies not only to DSOs but to MSOs as well. Thus, oscilloscope vendors should ensure that waveform update rate is not compromised when they create an MSO by porting logic acquisition channels into a DSO. Otherwise, this would lead to sacrificing the use-model of traditional oscilloscope. Moreover, mixed-signal measurement solutions that are based on external logic pods and/or two-box solutions connected through an external communication bus like USB are generally difficult to use and unresponsive. On the other hand, MSOs that are based on highly integrated hardware architecture are easier to use and more responsive.

MSO capabilities

The aim of the mixed signal oscilloscope is to provide the functionality of a digital oscilloscope along with that of a basic logic analyser.

The logic analyser performance is normally not that of the top-line analysers, but will normally include 16 or 32 channels and functions such as parallel / serial bus protocols decoding and triggering.

The MSO scope channels operate in the same way as a traditional scope - the instrument can be used purely as an oscilloscope if required. The MSO treats the oscilloscope and logic channels in different ways:

  • Oscilloscope channels: These are full analogue channels that use a analogue to digital converter, ADC, to convert the analogue inputs into a digital format. This information is then processed so that the waveform is displayed showing the analogue aspects of the signal
  • Logic channels: The logic channels on the mixed signal oscilloscope are converted straight into a digital format. The signals then appear on the screen as a high or low level, and no analogue information is present. There are more of these logic channels to enable full visibility of the logic on a circuit, but they are much easier to implement because they do not require full analogue to digital conversion. If the analogue aspects of a digital signal are required to be viewed, then this can be connected to one of the analogue channels.

One of the key advantages of the Mixed Signal Oscilloscope, MSO is that only one unit is required for performing both oscilloscope and logic analyser based tests. When investigating logic circuits, particularly those using embedded software and using MCUs, often the full capability of a logic analyser is not needed. Instead an integrated combination of both scope and analyser is needed so that the analogue and digital traces are synchronised.

As such the MSO logic channels provide sufficient logic analysis for many applications, but combine this with an excellent oscilloscope to give a test instrument that is sufficient for most occasions.

Comparison of logic analyser and MSO

The MSO, mixed signal oscilloscope provides an excellent solution for many applications, but when choosing whether to proceed with one, there are some decisions to be made.

A comparison of typical capabilities is given below.

Comparison of Logic Analyzer and Mixed Signal Oscilloscope
ParameterMixed Signal OscilloscopeLogic Analyzer
Channel count16 / 3264 to 204 +
TriggeringSingle event on both analogue and digital channelsAdvanced sequential capabilities
Timing analysisYesYes
State analysisYes: resulting from inclusion of separate channels for clocksNo; no provision for clock input

MSO format

Mixed signal oscilloscopes can be obtained in a variety of formats. The traditional bench top box format is popular as many scopes use this format. Many oscilloscope manufacturers extend their ranges by adding the mixed signal capability into certain scopes within their ranges.

In addition to the bench top formats, USB PC based mixed signal oscilloscopes are also available. These typically have a maximum of 16 logic channels, but this may be added onto either two or four channel analogue channels making a very powerful instrument.

Watch the video: PicoScope Mixed Signal Oscilloscope -- Basic configuration of digital channels (May 2022).